[ad_1]
Celebrating a Special Occasion with Jewelry
Jewelry and gems, The Buying Guide
Colorful choices in colored Gemstones
Important advice before you buy colored gemstone
What to ask when buying the gemstone
Asking the right questions is the key to knowing what you're getting when it comes to buying gemstones. It is also the only way you can be sure what you are comparing when considering gems from different jewelers. Be sure the jeweler can answer your questions, or can get the answers for you. Then, be sure the jeweler is willing to put the answers in writing on your bill of sale. Finally, verify the facts; double check that the stone is as represented, by having it examined by a qualified gemologist appraiser. In this way you'll have no doubts about what you are getting, and you'll begin to develop a solid relationship with the jeweler from what you make the purchase, based on confidence and trust. And, in the event the stone is not as represented, you'll know in time; and have the information you need, to get your money back.
Questions to ask when buying a diamond
You should always have very specific information before purchasing a fine diamond weighing one carat or more. For smaller stones, the information may not be so readily available, since most jewelers do not take the time to grade them precisely. An experienced jeweler, however, should be able to provide information regarding quality for stones from a half carat and up, or offer to find it for you. Indeed, some laboratory are now providing grading reports for diamonds from 0.47 carats and up.
Also keep in mind that since it is not possible to grade mounted diamonds accurately, we recommend that fine diamonds weighing one carat or more be purchased unmounted, or moved from the setting and then remounted. In jewelry containing numerous small diamonds, the stones are graduated before they are set and information may be on the sales tag. If not, it is extremely difficult to know for sure what the true quality is, and much can be understood by a setting. We recommend buying such pieces only from a knowledgeable jeweler with a good reputation.
Here are the basic questions to and information that needs to be included on the bill of sale of your diamond:
1. What is the exact carat weight? Be sure the stone's weight is given, not its spread.
2. What is its color grade? And what grading system was used?
3. What is its clarity (flaw) grade? Again, ask what system was used?
4. What shape is it? Round, pear, marquise?
5. Is it well cut for this shape? How would the "make" be graded: ideal, excellent, good?
6. What are the exact millimeters dimensions of the stone?
7. Is this stone accompanied by a diamond grading report or certificate? Ask for a full report.
Be sure to find out what system was used to grade the stone. If GIA terms are used, ask if GIA standards and methods have been applied to grading the stone (Diamond).
Be sure to get the exact millimeter dimensions of the stone; the dimensions can be approximated if the stone is mounted. For a round stone, be sure you are given two dimensions for the stone's diameter; since most are not perfectly round, you need the highest and lowest. For fancy shapes, get the dimensions of the length and width. Always get the dimension from the table to the culet as well, that is, the depth the stone.
Be especially careful if the diamond is being taken out on consignment, on a jeweler's memorandum or sale slip, or on a contingency sale. Having the measurements in writing helps protect you from being accused of switching should you have to return the stone for nay reason.
Always ask if the stone has a certificate or diamond grading report and, if so, make sure it accompanies the stone; if you are taking the stone (diamond) on approval, ask for a copy of the report. If there is no report or certificate, find out who determined the color and flaw grades; make sure the seller puts that information on the bill of sale, and insist that the sale being contingent upon the gemstone's actually having the grades represented.
Additional questions to help you make your selection
Is it large enough?
This is a valid question and one you should be honest with yourself about. If you think the diamond is too small, you will not feel good about wearing it. Remember that such other factors as clarity and color can be judged several grades with little visible difference, and this might enable you to get a larger diamond. And remember that the color and type of setting can also help you achieve a larger look.
Does this diamond have a good make?
Does this stone have good proportion? How do its proportions compare to the "ideal?" Remember, much variance can exist and a diamond can still be beautiful, desirable gem even if it does not conform to the ideal.
Nonetheless, you will not want a diamond with poor proportions, so if you have any question about the diamond's brilliance and liveliness; If it looks lifeless or dull in spots, you should ask specifically about the proportioning of the cut. In addition, you should ask if there are any cutting faults that might make the diamond more vulnerable to shipping or breaking, as for example, an extremely thin girdle would.
Has this diamond been clarity enhanced?
Be sure to ask when or not the diamond has been laser treated, or fractured filled. If it is accompanied by a GIA diamond report, the report will indicate lasering, if present. However, GIA will not issue a report on a fraction filled diamond and some jewelers do not know how to detect them. If there is no GIA diamond report, be sure to ask explicitly, and get a statement in writing that the diamond is or is not clarity enhanced, whichver the case may be. Getting this fact in writing may save you a big head should you learn later that the diamond is enhanced.
Does this diamond show any fluorescence?
If a diamond fluoresces blue when viewed in daylight or under daylight type fluorescent light, it will appear whiter than it really is. This can be desirable quality so long as the diamond has not been graduated or categorically incorrect. A diamond may also fluoresce yellow, which means that in certain light its color could appear worse than it actually is. If the diamond has a diamond grading report, any fluorescence will be indicated there. If there is no report, and if the jeweler can not tell you whether or not the diamond exhibits fluorescence, the diamond's color grade may be incorrect.
Special tips when buying a diamond
Ask the jeweler to clean the diamond
Do not hesitate to ask to have the diamond cleaned before you examine it. Cleaning will remove dirt, grease, or indelible purple ink. Cleaning is best done by steaming or in an ultrasonic cleaner. Cleaning also helps to ensure that you'll see the full beauty of the diamond; diamond can become very dirty just from customers handling them, and, as a result, look less brilliant and sparkling than they really are.
View the diamond against a dead white background
When looking at unmounted diamonds, look at them only against a dead-white background such as white blotter paper or a white business card, or on a grading trough. Examine the stone against the white background so that you are looking at it through the side, not down through the table. Tilt the diamond toward a good light source; daylight fluorescent lamp is the best. If the diamond shows any yellow body tint when viewed through the girdle, if it is not as colorless as an ice cube, then the diamond is not "white" or "colorless."
Get the facts on a bill of sale
Ask that all the facts concerning the diamond be put on the bill of sale. These include the carat weight, the color and flaw grades, the cut, and the dimensions. Also, be sure you obtain the report on any "certificated" diamond, as diamonds accompanied by laboratory reports are sometimes called.
Verify facts with a gemologist
If a diamond is one carat or larger and not accompanied by a reputable laboratory report, make the sale contingent on verification of facts by a qualified gemologist, gem testing lab, or the GIA. While the GIA will not estimate dollar value, it will verify color, flaw, grade, make, fluorescence, weight, and other physical characteristics.
Weight the facts
Decide what is important to you and then weigh the facts. Most people think color and make are the most important considerations when buying a diamond, but if you want a larger diamond, you may have to come down several grades in color, or choose a slightly spread stone, or select one of the new shapes that look much larger than traditional cuts. The most important thing is to know what you are getting, and get what you pay for.
What to ask when buying a colored gemstone
As with diamonds, it's very important to ask the right questions to help you understand the differences in gems you may be considering. Asking the following questions should help you gain a greater understanding of the differences, determine what's right for you, and have greater confidence in your decision.
1. Is this a genuine, natural gemstone, or a synthetic?
Synthetic stones are genuine, but not natural.
2. Is the color natural?
Most colored gemstones are routinely color enhanced. However, gemstones such as lapis should not be, and you must protect yourself from buying dyed material that will not retain its color permanently.
Be especially cautiously when buying any blue sapphire; make sure you ask when or not the gemstone has been checked for diffusion treatment. Today, with diffused sapphire being found mixed in parcels of natural sapphires and unknowingly set into jewelry, it's possible that one may be sold inadvertently.
3. Clarify what the name means.
Be particularly careful of misleading names. when a gemstone is described with any qualifier such as Rio Topaz (which is not topaz), ask specifically whether or not the gemstone is genuine. Ask why the qualifier is being used.
4. Is the clarity acceptable, or do too many inclusions detract from the beauty of the gemstone?
Are there any flaws, inclusions, or natural characteristics in this stone that might make it more vulnerable to breakage with normal wear? This is a particularly important question when considering a colored gemstone.
While visible inclusions are more common in colored gems than in diamonds, and their existence has much less impact on value than they have on diamond value, value is nonetheless reduced if the inclusions or blemishes affect the gemstone's durability, or are so numerous that they mar its beauty.
Be especially careful to ask when or not any inclusion breaks the stone's surface, since this may weaken the gemstone, particularly if the imperfection is in a position typically exposed to wear, like the top of the stone or around the girdle. This would reduce the gemstone's value significantly. On the other hand, if the flaw is in a less vulnerable spot, where it can be protected by the setting, it may be of minimal risk and have little effect on value.
A larger number of inclusions will usually detract noticeably from the beauty, especially in terms of liveliness, and will also generally diminish the gemstone and make it more susceptible to any below or knock. Such gemstones should be avoided unless the price is right and you're willing to absorb the risk.
Also, certain gems, as mentioned earlier, are more brittle than others, and may break or chip more easily, even without flaws. These gemstones include opal, zircon, and some of the new and increasing ly popular gems, such as iolte (water sapphire) and tanzanite. This does not mean you should avoid buying them, but it does mean you should give thought to how they will be worn and how they will be set. Rings and bracelets are particularly vulnerable, since they are more susceptible to blows or knocks; brooches, pendants, and earrings are less vulnerable.
5. Do you like the color? How close is the color to its pure spectral shade? Is it too light? Too dark? How does the color look in different types of lights?
Learn to look at color critically. Become familiar with the rarest, and most valuable, color of the gem of your choice. But after you do this, decide what you really like, for yourself. You may prefer a color that might be less rare, and therefore more affordable. Be sure the color pleases you; do not buy what you think you should buy without you really like it.
6. Is the color permanent?
This question should be asked in light of new treatments (such as diffusion) and also because color in some gemstones is given to fading. two examples are amethyst and kunzite (one of the new and increasingly popular gems). Just which ones will fade and which will not, and how long the process may take, no one can know. This phenomenon has never affected the popularity of amethyst and we see no reason for it to affect kunzite's popularity, but we feel the consumer should be aware of it. There is evidence that too much exposure to strong sunlight or intense heat contributes to fading in these gemstones, so we suggest avoiding sun and heat. It may be wise to wear these gems primarily for "evening" or "indoor" activities.
7. Does the gemstone need protective setting?
The setting may be of special importance when considering gemstone like tanzanite, opal, or emerald. They require a setting that will offer some protection; for example, one in which the main stone is surrounded by diamonds. A design in which the gemstone is unusually exposed, such as in a high setting or one with open, unprotected sides, would be undesirable.
8. Does the gemstone have a pleasant shape? Does it have a nice "personality?"
This will be determined by the cutting. Many colored gems are cut in fancy shapes, often by custom cutters. Fine cutting can enrich the color and personality, and increase the cost. However, with colored gems brilliance and sparkle are less important than the color itself. The most critical considerations must focus on color, first and foremost. Sometimes a cutter must sacrifice brilliance in order to obtain the finest possible color. But if the color is not enough enough or captivating enough to compensate for less brilliance, ask if the jeweler has something that is cut better and exhibits a little more sparkle. Keep in mind, however, that the more brilliant gemstone may not have the precise color you like, and that when buying a colored gem, color is the most critical factor. Without you find the gemstone's personality unappealing, do not sacrifice a beautiful color for a stone with less appealing color just because it may sparkle more. Compare, decide based upon what you like, and what you can afford.
When considering a pastel colored gem, remember that if it is cut too shallow (flat), it can lose its appeal quickly (but only temporarily) with a slight build up of greasy dirt on the back; the color will fade and liveliness practically disappear. This can be immediately remedied by a good cleaning.
9. What are the colorless gemstones?
In a piece of jewelry where a colored gemstone is mounted with colorless stones to accentuate or highlight its color, ask, "what are the colorless stones?" Do not assume they are diamonds. They may be diamonds, zircons, man-made diamond imitations such as CZ or YAG, or synthetic white spinel (spinel is frequently used in the Orient).
Special tips to remember when buying a colored gemstone
– When looking at unmounted gemstones, view them through the side as well as from the top. Also, turn upside down on a flat white surface so they are resting on the table facet and you can look straight down through the stone on the table facet and you can look straight down through the stone from the back. Look for evenness of color versus color zoning; shades of lighter or darker tones creating streaks or planes of varying color.
– Remember that color is the most important consideration. If the color is fine, the presence of flaws or inclusions does not detract from the gemstone's value as significantly as with diamonds. If the overall color or beauty deter is not seriously affected, the presence of flaws should not deter a purchase. But, conversely, flawless gemstones may bring a disproportionately higher price per carat due to their rarity, an larger sizes will also command higher prices. In pastel colored gems, or gemstones with less fine color, clarity may be more important.
– Be sure to check the gemstone's color in several different types of light; a spotlight, sunlight, or fluorescent or lamplight, before making any decision. Many gemstones change color; some just slightly, others dramatically, depending upon the light in which they are viewed. Be sure that the gemstone is a pleasant color in the type of light in which you expect to be wearing it most.
If considering a gemstone with rich, deep color; especially if it is for special occasions and likely to be worn mostly at night, be sure it does not turn black in evening light.
– Remember to give special attention to wear-ability. If you are considering one of the more fragile gemstones, think about how the piece will be worn, where, and how frequently. Also, pay special attention to the setting and whether the gemstone is mounted in a way that will add protection, or allow unnecessary, risky exposure to hazards.
Get the facts on the bill of sale
If a colored gemstone is over one carat and exceptionally fine and expensive, make the sale contingent on verification of the facts by a qualified gemologist, appraiser, or gem testing lab such as GIA or American Gemological Laboratory (AGL).
Always make sure that any item you purchase is clearly described in the bill of sale exactly as represented to you by the salesperson or jeweler. For diamonds, be sure each of the 4 Cs is described in writing. For colored gems, essential information also includes the following:
– The identity of the stone or stones and whether or not they are genuine or synthetic, and not in any way a composite (Doublet, triplet).
– A statement that the color is natural, if it has been so represented; Egypt, in the case of sapphire, a statement that the stone either is surface diffused, or that that is not surface diffused.
– A statement describing the overall color (hue, tone, intensity).
– A statement describing the overall flaw picture. This is not always necessary with colored gemstones. In the case of a flawless or nearly flawless gemstone it is wise to note the excellent clarity. In addition, note any unusual flaw that might prove useful for for identification.
– A statement describing the cut or make. This is not always necessary, but may be useful if the gemstone particularly well cut, or an unusual or fancy cut.
– The carat weight of the main gemstone or gemstones plus total weight if there is a combination of main and smaller gemstones.
– If the gemstone is to be taken on approval, make sure that the exact dimensions of the gemstone are included, as well as any other identification characteristics. The terms and period of approval should also be clearly stated.
Other information that should be included for jewelry
– If the piece is being represented as being made by a famous designer or house (Van Cleef and Arpels, Tiffany, Caldwell, Cartier, etc.) and the price reflects this, the name of the designer or jewelry firm should be stated on the bill of sale.
– If the piece is represented as antique (technically, an antique must be at least a hundred years old) or as a "period" piece from a popular, collectible period like Art Deco, Art Nouveau, Edwardian (especially if made by a premier artisan of the period), this information should be stated on the bill of sale, with the approximate age or date of manufacture, and a statement describing "condition."
– If made by hand, or custom designed, this should be indicated on the bill of sale.
– If the piece is to be taken on approval, make sure millimeter dimensions; top to bottom, as well as a full description of the piece. Also, check that a time period is indicated, such as "two days," and before you sign anything, be sure that you are signing an approval form and not a binding contract for its purchase.
[ad_2]
